Skip to main content

Scrap Manufacturing Waste with Real-Time Analytics

Low-volume, high-mix discrete manufacturers convert assembly lines in hours—even minutes—to accommodate different production requirements. Their assembly lines can run a few days or a few shifts, making even the smallest of errors large enough to ruin output and cut into profits.

Add such losses to the tremendous amount of scrap and waste that manufacturers write off as the cost of doing business, and one can see how improvements in efficiency can save millions of dollars.

That’s why it’s no surprise that 68 percent of executives responding to a recent McKinsey global survey said their organization considers “Digital Manufacturing” a top priority. And so from the plant floor to data analytics and everything in between, manufacturers are investing in new technologies that enable them to increase plant efficiencies and improve remediation.

For example, using real-time analytics, one plant optimized its metal spray process, reducing defects and rework—increasing first-pass yield from 35 percent to 96 percent and saving the business $500K annually.

Another optimized its diaphragm manufacturing—reducing scrap by 40 percent and increasing yield by 47 percent. The company realized $900K in OpEx and significantly increased capacity—all through deploying real-time analytics in its legacy plant.

AI Powers the Leap to Industry 4.0

To achieve these types of operational improvements, manufacturers need to gain control over all of the data produced on the factory floor, from legacy machines to cutting-edge devices. No easy task, when one considers that most industrial equipment is not designed to share data for real-time viewing and decision-making.

“What they need,” said Mike Luscombe, VP of Global Market Development at Honeywell Tridium, “is a way to collect and normalize all of the data generated by these different machines. This enables them to gain, in real time, an accurate picture of their processes and operations.”

Specialized developers are bringing their knowledge of industrial processes, AI, data systems, and Time-Sensitive Networking (TSN) to create sophisticated solutions that can convert disparate manufacturing data into one common measurable form.

Honeywell Tridium, in collaboration with Dell and Intel®, developed the Niagara4 i4.0 Factory Optimization Solution to do just that. The system comprises a complete hardware and software stack designed to withstand the harsh conditions found in industrial environments. The solution incorporates the Niagara Framework—an open technology platform running on a ruggedized Dell Edge Gateway as shown in Figure 1.

Figure 1. The Niagara solution makes it easier for manufacturers to deploy real-time analytics on legacy equipment data.

“The system collects edge data that’s gathered by sensors positioned on various legacy machines. The software then normalizes that data, before it uploads relevant information to the cloud,” said Luscombe. “This gives manufacturers a level of operational insight they’ve previously not been able to achieve.”

The software can also automate remediation, helping correct problems as soon as they arise. For instance, on the factory floor, machine operators can view real-time data on a dashboard and immediately determine if their setup is properly aligned and that tolerances meet specifications. And managers can also see overall production data to know if they’re ahead of or behind schedule, and take action as needed to stay on track.

Increasing Yields With Analytics

Luscombe explained how one customer—an aerospace manufacturer—sought to increase yield in its carbon fiber fabrication process, which uses an autoclave to produce aircraft braking components. “Once they started using the Niagara solution, the company quickly discovered that the composition of the local utility’s natural gas supply lacked consistency. That made it nearly impossible for the manufacturer to maintain proper conditions in their autoclave. And that was responsible for an extremely low yield.”

Knowing this simple fact about their gas supply opened the eyes of management, enabling them to automatically adjust their manufacturing process and recipe to account for any variations in fuel quality. The outcome of this one discovery delivered an 89 percent increase in yield as well as a $2.5M savings in OpEx and more than a $2M cost avoidance in CapEx.

On the Edge, Before the Edge

Honeywell Tridium has close to 800,000 instances of Niagara deployed worldwide. “We’ve been developing software for edge-type industrial and building management applications long before it became common to process data at the edge,” said Luscombe, “As the IIoT technology evolved and the processing got faster, we’ve been able to apply our expertise and understanding of how data is relevant and actionable to new sectors.”

The Niagara solution provides manufacturers with the ability to track and display KPIs such as Overall Equipment Effectiveness (OEE), Rolled Throughput Yield (RTY), and Cost of Poor Quality (COPQ). In addition, the solution can help them optimize workflow through visualization tools and smart digitized forms. Companies can also use the solution’s capability to process real-time and historical trend data, allowing them to accurately perform a variety of tasks, including detecting defects, tracing parts, and managing recipes.

And given that data collection is an essential part of this cloud-agnostic solution, Niagara follows industry best practices for cyber security. This includes support for features such as strong hashed passwords, TLS v1.2 for secure communications, and certificate management tools for authentication.

Niagara also uses open edge-to-cloud connectivity for a variety of uses, including sensors, programmable logic controllers, machines, and ERP systems. It also provides embedded edge analytics and an open-app environment that can help machine operators and factory managers become more efficient through actionable insights.

Using Real-Time Analytics to Make Big 4.0 Gains

The speed and short production runs—which are common to the low-volume, high-mix discrete manufacturing sector—can intensify errors if not rapidly corrected. By collecting and normalizing data created by an assortment of equipment and machines, manufacturers can finally gain real-time visibility into processes and operations on the factory floor and take swift remedial action.

“When manufacturers can run edge analytics on legacy equipment,” said Luscombe, “it enables them to take advantage of new opportunities to increase efficiency and reduce manufacturing costs, which translate into big operational wins.”

About the Author

Robert Moss is an independent consultant and strategist who focuses on the value gained through IoT, AI, machine learning and other technologies. He also helps give voice to executives at leading technology companies, enabling their personal stories to show how they encourage innovation, overcome obstacles, and improve their leadership skills. Tweets @RobertMoss_IoT

Profile Photo of Robert Moss